Home research Introduction to wellbore positioning - download

Introduction to wellbore positioning - download

 

This industry standard publication (accepted by the ISCWSA board) is published through the UHI Research Office, the full eBook is available to view or download below. Please note - it is expected this publication will be added to and developed over time as techniques change or newer technology is employed, please check this page regularly if it is important to you to have the latest version of the publication, version information is at the bottom of this page.

Introduction to Wellbore Positioning (V04.05.16) pdf - 10MB

LATEST VERSION: V04.05.16

New Wellbore Surveying Competency Programme
Click above link for details of this course, developed by the University of the Highlands and Islands in partnership with the Society of Petroleum Engineers (SPE) Technical Section for Wellbore Positioning.


Wellbore positioning

Copyright notice

This eBook is provided, and may be used, free of charge. Selling this eBook in its entirety, or extracts from it, is prohibited. Obtain permission from the author before redistribution.

In all cases this copyright notice and details of the authors and contributors (pages 1 & 2) must remain intact.

Permission is granted to reproduce this eBook for personal, training and educational use, but any extract should be clearly attributed to the author giving the name and version of this publication.

Commercial copying, hiring, lending of this eBook for profit is prohibited.

At all times, ownership of the contents of this publication remains with Prof Angus Jamieson.

Copyright © 2012 University of the Highlands and Islands

 


As this publication develops we will post any version update information below:

VERSION: V04.05.16

Updates from the below version include; 

Chapter 8 ‘Survey Frequency’ has been replaced, A new chapter 15a ‘Along Hold Depth Measurements’ chapter has been added, Chapter 24 ‘Tortuosity’ has been replaced with a new chapter called 'Combined Surveys',  Appendix D ‘Some Useful Mathematics’ has been added, 

A new contents page has been inserted, A new table of figures has been inserted therefore figure numbers have changed, A new table of tables has been inserted, 

Page 47 ‘either in real time’ has been reworded ‘either close to real time’, ‘In the days when there were no personal computers the average angle was the preferred method of calculating surveys and it produces results similar to the more recent minimum curvature method currently in use’ has been added to Page 47, Page 60 ‘This gives them an enormous  dynamic range, of as much as 109.’  Has replaced ‘This gives them an enormous dynamic range, of as much as 10^9’ has replaced with, Page 115 ‘survey tool that will be or has been run’ has replaced ‘survey tool that has been run’, Page 130 ‘many different ways’ has replaced ‘main different ways’, Page 143 ‘at a rather coarse level’  has replaced ‘at a rather course level’, Page 161 ‘-2.12°’  has replaced ‘-2.12o’

VERSION: V01.05.14

Updates from the below version include; A small but important update to page 25, example 4, which has been amended. It was noticed that the line "And if the convergence was +2" was wrong and should have read "And if the convergence was -2".

VERSION: V18.9.13

Updates from the below version include; addition of chapters 26 (Relief Well Drilling) and 27 (Subsea Positioning), amendment to the formula on page 69 regarding vector dot products, minor spelling/grammar corrections

FIRST VERSION: V01.7.12

Adobe Acrobat (v01.7.12) pdf - 9.7MB


If you are looking for the video presentation "Making the Most of Borehole Surveying" please follow this link.